BurnInTest Professional

What's new in this version:

BurnInTest Professional 11.0 Build 1004
- Change log not available for this version


BurnInTest Professional 11.0 Build 1003
- Dashboard, Changed so double clicking on test tile should maximize/minimize the hie while tests are running/finished
- Inventory Test, Added error field to tile
- Inventory Test, Should now end the if the inventory test is the only main test running
- Inventory Test, Fixed bug where test failed even when there is a match
- MonitorTest, Fixed double toolbar menu for certain tests
- MonitorTest, Fixed licensing issue preventing welcome window from showing when BIT license couldn't be imported
- MonitorTest, Fixed toolbar not appearing for vertical sync test and adaptive you test
- NPU Test, (Experimental) Enabled inference Test via OnnxRuntirne/QNN for ARM64
- Preconfig Tests, Fixed video file path in 24 hour and 3 minute test
- Temperature Test, Trim sensor name to fit to tile
- Fixed cycle count in Sound and 3D tests
- Misc, Removed test.wmv


BurnInTest Professional 11.0 Build 1002
- Changed to allow running BIT on WinPE without online license check
- Fixed missing library files preventing BIT from running on WinPE
- CPU Frequency Tab, Changed so collection will continue when restarting testing (e.g. start test, reset, start test)
- Monitor Test, Fixed Issue where monitor test was unresponsive when launched as a pre-test
- Pre-tests, Fixed test not ending when all pre-tests are complete and no main tests are running
- Scripting, Fixed test tiles not updating after running SETTEST/UNSETTEST Temperature Tab, Fixed sources not updating when selected sources were changed in Preferences
- Temperature Test, Fixed sources always being automatically set on test start


BurnInTest Professional 11.0 Build 1001
New:
- Ported BurnInTest to ARM64
- NPU Test (x86 only)
- RGBght Test (limited)

3D Test:
- Removed DX9 test option
- Updated to detect when user closes the test early
- Fixed incorrect error being generated when the user closes the test window
- Fixed some errors not showing up on test tile but did show in logs

Battery Test:
- Added fixed work mode for testing batteryfe. So a fixed amount of computation per unit time. This change allows comparisons of batteryfe to be made between different machines and forms the basis for a standardised batteryfe test.
- Added option to stop testing when battery threshold is met
- Added option to configure battery charge polling time
- Added error when running battery test and AC power is plugged in
- Changed so eventske sleep, hibernation, or AC power plug/unplug are counted as test failures
- Resolved issue where battery status was not properly retrieved when AC power was plugged/unplugged
- Separated out battery preferences from the temperature preferences

Bluetooth Test:
- Changed to display connection detailske in Network Test

CPU Test:
- Added AVX512, (ARM) NEON extension option
- Removed MMX and 3DNow! extension option

CPU Frequency Tab:
- Added new 'Clock Frequencies' tab to display CPU frequency during test as a graph
- Detects when CPU is throttling

Event Log Tab:
- Updated to display power status changes, e.g. Sleep/Hibernation, Batter saver ON/OFF, Display On/Off/Dimmed
- Updated to display individual tests starting/stopping messages to thest view

Inventory Test:
- Added option set mtiple inventory files, test fails if system does not match any inventory files
- Added option to allow skipping sections for comparison (e.g., CPU, RAM, GPU, Disks)

Keyboard Test:
- Added preferences dialog to allow selection of keyboard layout to load on start

Management Console:
- Improvements to settings UI, including a new option to use the PassMark public test server
- Send memory profile information similar to Memtest86

Monitor Test:
- Updated to V5
- Ported EMC tests from BIT to MonitorTest
- Added adaptive sync test

Network Test:
- Added Cellar (GSM/CDMA) adapter types as selectable testing option
- Adv Network Test, Changed to target the load % better

PCIe Test:
- Added support for PCIe Gen 4 card
- Fixed crash when no PCIe cards were connected
- Fixed issue where benchmark test threads weren't checking if the test wasn't running

Plugin/Pre-test:
- Fixed the issue where Plugin/Pre-test tiles are not displayed on the subsequent test runs

Pre-Config Tests:
- Added batteryfe pre-config test

Reports:
- Added speeds for Advanced Network, Bluetooth, Serial and PCIe test rests when 'Include Speed' is enabled
- Included memory timings to reporting functions
- Included SMBIOS memory information in certificate report
- Added option to save certificate as PDF
- Added battery logging
- Updated certificate templates with newer logo, fixed inconsistent table widths, fixed html errors

Scripting:
- Added scripting options to set Config tab options
- Added support for setting API key and update interval for management console
- Added scripting options for RGBLightTest
- Added NOTEST option to SETDISK to disable testing of certain disks

Sound Test:
- Show maximum distortion while the loopback test was running
- System Information Tab
- Updated to display information in HTML
- Updated to display RAM Clock Speed & Timings
- Report availability of H.265 and HEIF/HEIC
- Fixed issue with displaying volume information of removable drives

Temperature:
- Added RAM Temperature to the monitoring options
- Added separate threshold option for SSD, now HDD and SSD can have different temperature thresholds

Webcam Test:
- Fixed drop downst order not matching stored camera order

USB Test:
- Added USB Enumeration Test
- Added option to disable Windows USB Connect/Disconnect Sound during testing
- Fixed off by one error where first usb tester cod not be found
- Fixed idle usb threads generating errors when tests are running on another thread

Video Playback Test:
- Added new 1080p H.264 video as defat
- Fixed issue where video window wodn't correctly resize for videos with larger aspect ratios
- Changed to attempt to load defat video path if nothing is specified

Misc:
- Added option to disable sleep while running tests
- Added option to highlight traces on graphs in battery, frequency, temperature tabs
- Added management console status to bottom right of the status bar
- Added option to print stickers with PC Specs, can also add QR Code when BurnInTest is connected to a Management Console and have test rests. QR Codenks to the test rests page
- Added option to scroll through available test selection menu
- Added option to double click test tile area to add and remove tests
- Added option to deactivate/deregistercense in the Help menu
- Show Actual Elapsed Testing Time, BurnInTest Start/End Test Time/Duration is in real time and includes the time the system may spend in sleep/suspended state. If the system was sleep/suspended during testing, BurnInTest will now also show time the system is actually running tests
- Changed Exit Code to match behavior when running from script. Exit form GUI or Script "EXIT", exit code will be 1 for errors during testing or 0 for success
- Changed defat window size to take up to 80% of the screen area
- Changed to only install legacy DirectIO device driver on older machines. Legacy DirectIO is required on Win7 and early Win10 machines, but is less secure that the latest driver, which is used on Win10 & 11 machines. Previously both versions were installed on disk, even if the Legacy version was never used. This previously pointlessly triggered some security scanning solutions.
- Improved key abuse detection, BurnInTest now requires an active Internet connection (with exception for sitecenses)
- Improved responsiveness of UI
- Fixed pre-configured tests not respecting "don't show this warning again" option
- Fixed minimum window size not being enforced
- Display an icon next to the pre-test items in the dashboard tile view
- Removed 3rd party temperature monitor options from BurnInTest


BurnInTest Professional 10.2 Build 1016
- Fixed crash when starting BIT from command prompt and working directory not set to BIT directory


BurnInTest Professional 10.2 Build 1014
Fixed:
- possible crash at end of testing when 'Report WHEA hardware errors' option is enabled
- possible BSOD on Ryzen Zen 4 chipsets when reading ECC MSR registers
- possible BSOD when running program on a VM in Windows 11


BurnInTest Professional 10.2 Build 1013
- Scripting, Fixed SETTEST & UNSETTEST commands was not accepting MONITOR or KEYBOARD as valid tests
- Scripting, Fixed issue with SETMANAGEMENT command not connecting to console properly

Fixed:
- possible crash when Plugin file path is too long
- issue where only first DIMM was displayed in sysinfo tab + reports
- 'C:' always displaying for disk test when running on USB
- issue where BIT does not close when running a script and a stop file is created
- incorrect duty cycle for some tests in reports
- Prevent issuing of ATA passthrough commands to non-supported USB drives such as flash drives/SD card readers


BurnInTest Professional 10.2 Build 1012
- Added some extra error detection for the OpenCL error code CL_OUT_OF_RESOURCES. This error was seen in real world on systems with 4 of main RAM. Which isn't really enough to run windows.
- The OpenGL Graphics 2D and GPGPU Test will exclude GPUs from OpenClOn12 platform (Windows Store App OpenCLTh' and OpenGL® Compatibility Pack). The app is an emulation layer to run OpenCL code through DirectX 12 supported hardware on system that may not have OpenCL installed. This can cause duplicates of GPUs to appear (i.e. one directly running on hardware, the other through DirectX 12 on hardware) and an adapter called the "Microsoft Basic Render Driver". Don't include these GPUs, as they are known to cause failing tests.
- 3D Graphics, Removed the FPS penalty message in DX12 test
- Added support for DISABLE keywords INVENTORY, TEMPERATURE, MONITOR, KEYBOARD in BITAccess.txt
- Prevent duty cycle from being altered on the dashboard if disabled by BITAccess.txt
- Updated help document for "-MP" command to note when using logginag with filename variable %REPORTSERIAL%, the serial will not be in the log filename because the Report Information window is shown after the existing log are saved and before the information is collected from the user. User should use "-M" instead to prompt the user for the serial before the test is started. Video Playback, Fixed 'No operations reported' error occurring due to previous changes
- Further BSOD system crash fixes


BurnInTest Professional 10.2 Build 1011
- Further BSOD crash on Lenovo systems


BurnInTest Professional 10.2 Build 1010
Fixed:
- Fixed some Chinese translations
- possible crash while attempting to collect system information


BurnInTest Professional 10.2 Build 1009
Fixed:
- crash when collecting system information on AMD 19h machines
- Cash when collecting system information if "Enhanced Windows biometric security" setting is enabled in BIOS
- some Traditional Chinese translations


BurnInTest Professional 10.2 Build 1008
- Fixed issue where DirectIO driver may not load with multiple instances of the same app or when other PassMark apps are running concurrently
- Disable loading legacy DirectIO driver on Win10/11 to prevent 'A driver cannot load on this device' error
- Dropped support for 32-bit DirectIO driver, running 32-bit verion of PerformanceTets will not have temperature monitoring and less system information gathered


BurnInTest Professional 10.2 Build 1007
- Temperature, bug fix, reenabled increased auto select temperature sources back to 64
- Fixed bug where Save Dashboard Image was not being saved on PASSED test when running from script and script contains the EXIT command at the end.
- Advanced Network Endpoint, updated to prevent loop running longer than necessary
- Advanced Network Endpoint Increased wait to 20 seconds for EPs to respond to prevent 'connection reset by peer errors' for 7+ connections
- 3D Graphics DirectX 12, Increased scene complexity with Duty Cycle > 50%
- Video Playback Test Reenabled watchdog to track video playback test and increment operation count on successful first video load
- GPGPU, If GPGPU test is selected to run, but no GPUs were tested (i.e. All GPUs matches skip list), BurnlnTest will not raise the No operations during test period for the GPGPU test.
- GPGPU, Verification will attempt to map the GPU buffer to read directly, else if mapping fails, code will fall back by copying the GPU buffer to memory instead
- Fixed bug where preset configs' description and icon are not shown in GUI for saved configuration file from older versions


BurnInTest Professional 10.2 Build 1006
- Added option to disable selection of individual CPU Cores as temperature sources when using Auto Select Temperature Sources at Start of Testing
- New parameter option to existing script command SETTEMP AUTO, e.g. SETTEMP AUTO YESNOCORES, will turn on automatic BurnlnTest temperature monitoring at the start of testing, but will not auto select individual CPU Cores
- Converted existing GPGPU test from DirectCompute (HLSL) to OpenCL to support both WDDM/TCC GPUs
- Updated system information library for support for Mellanox network adapters eg Connectx3 Pro MCX314A-BCCT
- Updated system information library to return Nvidia Tensor GPUs (TCC) in Video Card query


BurnInTest Professional 10.2 Build 1005
- 2D test, Nvidia TCC Adapters (those without display) should now be found/tested Fixed freeze bug when loading/running different configs sequentially
- Allow enabling/disabling of Temperature test through scripting
- System Info, support retrieving CPU info for Intel Alder Lake Mobile & Ryzen 7000 System Info, support retrieving temperatures for Intel GPUs (e.g. Intel Arc) & Ryzen 7000 iGPUs


BurnInTest Professional 10.2 Build 1004
- Fixed Directio driver failing to load on some systems (caused by 22H2 updates) which would prevent temperatures from being collected and could display Windows "Program Compatibility" driver cannot load errors
- Report information, 'MachineType' and 'SerialNumber', now sent to Management Console
- Updated system information library to support retrieving CPU info for Intel Raptor Lake, Tremont and Sapphire Rapids chipsets
- Fixed retrieving cache info for Intel hybrid architectures


BurnInTest Professional 10.2 Build 1003
- Removed dependency on VCRUNTIME140.DLL
- Management console, made a change where if user is autorunning and has management console enabled, delay autorun until BIT is connected to the console L>
- Management console, updated management console cloud link


BurnInTest Professional 10.2 Build 1002
- Updated Directio64.sys with another newly Microsoft signed version to fix issues with Windows 11 22H2
- Disk test, fixed missing pattern name when a disk error was logged
- Network test, excluded received and outbound errors (low level) from the overall error total
- Fixed a case where -P command line parameter wasn't being prioritised and could still look for files in default locations
- Management console, changed behaviour to not close preferences window if API key incorrect
- Management console, changed connection error to mention checking internet connection is active
- Management console, added a link in preferences window to get a API key
- Management console, increased number of system information lines sent to a max of 50
- Management console, added icon/button to dashboard to display connection status and clicking on it will display preferences > Management tab
- Logging, stopped logging temperature sensors that weren't selected (instead of logging them as N/A)
- Logging, added which temperature sensors are selected for trace log output
- Logging, added monitor information to customer certificate
- Logging, fixed Physical Disk Read Test on the HTML Report not reporting Avg Read Speed MB/s


BurnInTest Professional 10.2 Build 1001
- Fixed a „GPGPU unable to access graphics resource“ occurring in the GPGPU test once a cycle


BurnInTest Professional 10.2 Build 1000
- Added support for API keys to connect to a cloud version of Management Console
- Scripting, updated SET2DGRAPHICS command to allow setting of per monitor test options
- 2D RAM & GPGPU test, made some changes so that the number of tests started is the lower count of available GPUs between BurnInTest's system information collection and the windows API call EnumAdapters. This should stop some issues seen with docking stations that do not respond correctly to EnumAdapters causing the GPU count to be too high, so more tests than needed are run and errors are seen
- GPGPU test, added improved recovery attempt when an error occurs during the GPGPU tests
- 2D Video memory test, reduced amount of memory being allocated for testing when running the 3D test at the same time
- 3D DX12 test, added new error message if resource files failed to load (but do exist on disk), eg in a low resource situation
- Fixed a case where when running from USB the LastUsedSettings.cfg was not loaded from the USB drive correctly and could instead use a locally installed copy or default values
- When not running tests, status messages sent to management console is reduced to once per minute, will increase when tests are being run
- Updated preferences to allow for adjusting how often status messages are sent to management console while tests are running
- Advanced network test, fixed tile numbering (x of x) while test is running and issue where all 20 result tiles were displayed instead of how many NICs were neing tested
- Advanced network test, moved the result tile title slightly to the left to match with progress tile title positioning
- Advanced Network Test, fixed last error description not displaying on tiles
- Advanced Network Test, Fixed display issue where cycles, operations and errors were not displaying on tiles
- Fixed serial port identification in WinPE for a specific add on card that was identifying them using hex A/B/C instead of numbers
- Parallel ports, fixed an instance where the parallel test would not start correctly first time if the test wasn't already selected when BurnIntest was launched
- Added a workaround for Windows 11 22H2 update that was blocking a driver load and preventing BurnInTest from gathering as much system information and seeing CPU temperatures


BurnInTest Professional 10.1 Build 1004
- Webcam test, can now be run as a pre-test or a main test. When run in main test mode the close / ok buttons will be disabled
- Preferences, added new tab for webcam options
- Scripting, added new webcam options command (SETWEBCAM)
- Fixed a bug preventing configuration files from being saved correctly
- Fixed an issue with the disk test auto select not selecting >100 disks correctly
- Fixed a crash that could occur when a log file reached its max line count and created a new file


BurnInTest Professional 10.1 Build 1003
- Test preferences, logging, added a "Show error details on certificate" option to allow for any error details to be turned off and just show "FAIL"
- Test preferences, disk, fixed an issue where auto select options were not being set properly and could leave the disk size as 0%
- Disk test, fixed several issues where >100 disks would not be displayed in the user interface correctly
- Temperature progress tile, fixed Min/Max temperatures incorrectly displaying the current temperature
- Fixed an old to new config conversion issue when the "All available" video memory test option was selected
- Fixed a possible crash when converting old configs Made some changes to fix an issue where
- BurnlnTest fails to connect to the management console, but then continually sends connection messages each status update


BurnInTest Professional 10.1 Build 1002
- Added Threads per CPU, P-Core and E-Core count to System Information tab
- Fixed incorrect "Endpoint Version not current" warning message in trace log
- Fixed missing "Threads per CPU" text in Text/HTML CPU system information output


BurnInTest Professional 10.1 Build 1001
- Fixed a config file conversion issue from V10.0 to 10.1 that could result in some setting being incorrect


BurnInTest Professional 10.1 Build 1000
- Added support for 12th gen Intel CPUs that use P (performance) and E (efficiency) cores, test threads for CPU test will be based on total available threads
- Add support for retrieving temperatures from Intel Ice Lake SP (3rd gen Xeon)
- Added support for retrieving DDR5 information
- Slightly changed RAM test memory allocation calculation to leave more free memory when running 2D and 3D tests
- Disk test, added support for up to 200 disk tests
- Preferences, fixed an issue when saving a log file without a fully resolved path (a filename with no path)
- Fixed USB version not loading settings file correctly at startup
- Added a check and specific error message if OpenCL.dll is not found on the system when trying to run the 2D - Local video memory test
- 2D Preferences, fixed window size drop down not being set correctly on initial window load
- Video Preferences, fixed Number of windows drop down not being set correctly on initial window load
- Fixed graphic flashing/redrawing issue on management console settings page caused by a no longer used icon being drawn


BurnInTest Professional 10.0 Build 1006
- Change log not available for this version


BurnInTest Professional 10.0 Build 1004
- Fixed an issue when running using a key.dat file to register BurnInTest, BurnInTest thought it was running in USB mode when it detected a key.dat and some of the file paths used (eg for pre-configured configs) could be incorrect. There is a now an additional check for running in USB mode
- Changed test selection and duty cycle dialog to show config time and cycles (if less than 15mins) when running in the trial version
- Added max run times (instead of 0 - run forever) to some of the pre-configured tests that were missing them so they work in the trial version
- Management Console, started tracking if connection was successful to prevent extra status messages being sent when connection failed for some reason
- Updated system information library to correct some incorrect CPU cache values being returned


BurnInTest Professional 10.0 Build 1003
- Updated MonitorTest to run as a registered "BurnInTest Plugin" user, will no longer launch in trial mode
- Updated KeyboardTest to run as a registered "BurnInTest Plugin" user, will no longer launch in trial mode
- Changed MonitorTest plugin test to display master screen before the touch screen tests
- After saving a result log from file menu it will now automatically open in the default viewer
- Fixed Monitor/Keyboard tests missing from results list view and Text/HTML reports
- Fixed battery window not displaying a main title, icon or runtime errors correctly when there were no batteries available
- Added webcam, battery, USB devices, RAM information to the system information section of the HTML test certificate
- Changed how optional Disk/USB speeds are reported in the HTML log & certificate, added them as part of the test name instead of in the result summary section
- Increased table sizes in HTML style logs to 800 wide
- USB test, made some changes so cycle lengths are more consistent when cycling USB3 test speeds


BurnInTest Professional 10.0 Build 1002
- Fixed test stop time being reset to 17 minutes in some cases
- 2D GPU RAM test, changed compile settings to avoid a VCTUNTIME140.DLL error
- Previous version config conversions, fixed an issue when converting config files from V8 to V9, bluetooth settings were not being copied correctly
- Previous version config conversions, attempt to convert old 2D lines and bitmaps settings for the 2D test. Other settings (EMC patterns) need to be re-chosen due to the extent of changes to the new per monitor 2D test
- Report Information, fixed "Include test duty cycles" state not being saved and restored correctly when using "Save as defaults"


BurnInTest Professional 10.0 Build 1001
- Battery test, fixed battery pre test not checking battery details correctly and throwing an error
- USB test, fixed a bug where the first USB3 test thread could stop the configuration of other USB3 plugs
- Fixed a localisation bug on progress tiles ("Low level errors" instead of "Runtime errors")


BurnInTest Professional 10.0 Build 1000
New inventory Comparison lest:
- Compares the current system information to a master list and an error is logged if there any difference
- Comparison can be done at start or end of testing
- The master list is stored as an XML file and can be created from the Inventory tab of the test preferences

New Shared Memory API:
- Added a shared memory block for API style access to BurnlnTest information, test status and temperatures
- The definitions for the shared memory structure and a demo are included in the installer

New 2D GPU RAM test:
- Replaces the Local/All available video memory test. It uses OpenCL and will allocate a large amount of the available video RAM and test it
- similar to the system RAM test
- The old test used the deprecated DirectDraw library which could not access greater than 4GB of video memory

New Pref-Configured Tests Tab:
- Added new tab to main user interface so configs can be loaded and run directly from this list. This will display config files that are saved in
- DocumentsPassMarkBurnlnTestConfigs
- Configs can now have a description and icon assigned to them which will be displayed on this tab
- Config order can be sorted by editing the cfg_order.txt file in DocumentsPassMarkBurnlnTestConfigs

New Battery Tab:
- Added a new tab to the main user interface to display a graph of the battery charge levels during testing
- Added discharge comparison rate selection
- When "main test" option is selected for battery test charge levels will be logged during testing in addition to previous behaviour of
- comparing charge level

New KeyboardTest Integration:
- Better integration of KeyboardTest, no longer have to specify a path command line flags to launch as a plugin
- Now has an individual option to enable/disable KeyboardTest in test selections and duty cycle dialog and on dashboard tab
- KeyboardTest files are now included in the BurnlnTest installer

New MonitorTest Integration:
- Better integration of MonitorTest no longer have to specify a path command line flags to launch as a plugin
- Now has an individual option to enable/disable MonitorTest in test selections and duty cycle dialog and on dashboard tab
- MonitorTest files are now included in the BurnlnTest installer

New Localisation Options:
- Added Korean and Chinese translations
- Language selection is via the new settings dialog under the "Edit" main menu item

New Settings dialog:
- Added options for language selection and default tab at startup

Dashboard:
- Added a dashboard tile for temperature with sensor names and current, min max temps
- Removed duty cycle slider from test tiles that don't have a duty cycle
- Added a "Runtime Error" count to each progress tile for quick referencing of test status
- Added left and right icons for scrolling through available test information
- Changed maximise/minimise icon

2D Test:
- Increased number of monitors supported from 4 to 8
- Changed 2D monitor tests (scrolling H, reference and colour bar patterns) to be selected on a per monitor basis and added better support
- monitors in different configurations
- 2D Test preferences, available monitors will be listed in the list box and a different test pattern can be selected for each one. Note that this
- order is not the same order as displayed by Windows by using "identify monitors" and the order can change if monitors are added,
- removed or powered off/on

CPU Test:
- Progress tile, only display decimal place when value is less than 100

Disk Test:
- Added average read/write speeds to display
- Disk wiping, added option to disk test preferences to format physical drive at end of test (only when running a physical disk test)
- At the end of testing a disk wipe dialog will be displayed with a 20 second countdown to allow it to be cancelled

GPGPU lest:
- Added a preference tab and option to avoid running the test on cards based on a name filter

USB Test:
- Progress tile, changed some text offsets so the error count was displayed on the tile
- Added "Cycle" option to speed selection to cycle between speeds (from Super Speed -> High Speed -> Full Speed)

Logging:
- Added average disk read/write speeds to logging
- Added USB benchmark read, write and loopback speed to logging
- Added option to remove system information from log

Management console:
- Added session & result IDs to log and status message on successful connection (will require an update of management console)
- Added checks for errors on status/result message updates from management console

Scripting:
- Started to remember last used script name and script path after opening a script next time "Run script" is selected
- Added scripting options for inventory, GPGPU, monitor, keyboard tests and other new config options

Tape test:
- Removed tape drive test, no longer supported

Test Preferences:
- New Config section, added options for setting a description and icon for the config (displayed on the Pre-Configured Tests tab)
- Battery, made some changes to battery settings to make it clearer and updated help with more information
- Logging, added options to save an image of the dashboard (will full screen and select the dashboard tab) at the end of the test
- Logging, added option to enable or disable logging of USB and disk speeds
- Logging, added option to remove system information from log
- Serial, removed 110 baud option. If a baud rate below 1200 is selected then the timeout value will be automatically increased to 10 seconds.
- Post test options, made some changes to "Always display result info" so that it will change the current displayed tab to the results
- dashboard. If being used in conjunction with "launch an external application and exit" then a message box will be displayed to allow the
- results dashboard to be seen (this brings it back into how it functions prior to V9 when there was an actual results window displayed at the end of testing).
- end of testing).

Test Selection and Duty Cycles:
- Added button and icons to test selection and duty cycle window to allow opening of test preferences at specific test page
- Added list of pre-configured tests on left side of dialog
- Added config description and icon to dialog
- Added temperature checkbox for consistency aid enabling/disabling the test


Misc:
- DDRS support when retrieving system information
- Support for Intel Elkhart Lake when retrieving system information
- Added a way of customising the background image for the main BurnlnTest user interface
- Added a "Don't show again" option to pre test warning, this will toggle the "Action before running tests" option for the current config to "None" if checked.
- "None" if checked.
- Removed some dynamic loading of functions from kerne132.d11 that have been around since XP SP2/Win7, now directly calling those
- functions (eg GetDiskFreeSpaceEx)
- Replaced Quick Test Menu items with Pre-Configured Tests
- Added CPU/GPU/HDD to sensor names on temperature tab
- Hid Remove/Configure columns in results list view when test was running / displaying results
- Fixed some errors not being displayed by category


BurnInTest Professional 9.2 Build 1009
- Serial Preferences, when a slow baud speed (<2400) is selected or one of the cycle options then the timeout will be set to the max value
- Serial Test, added a new error message if the serial port test was run without any serial ports selected to test in the configuration
- System information updated to recognise Windows 11


BurnInTest Professional 9.2 Build 1008
- TPM Test, made some changes to the self test for V2 TPMs which would previously fail and display "self test command blocked"
- Fixed an issue stopping system information from being written to the test log correctly when running BurnlnTest with the auto run flag -r
- Fixed an issue reading temperatures from AMD CPUs with multiple CPU groups (eg Ryzen 3990x)


BurnInTest Professional 9.2 Build 1007
Fixed:
- an issue with the parallel port test not being able to get the port address and left unable to start the test in some cases
- an issue reading AMD 4600/4800 CPU temps
- and issue preventing AMD GPU temperatures from being read if ADL_Graphics_Platform_Get failed to be loaded from ADL library


BurnInTest Professional 9.2 Build 1006
- RAM Test, made some changes to avoid a verification error being logged when the system was low on memory, in some cases a write phase was aborted due to the low memory but the verification phase would continue instead of being skipped which would lead to a verification error for some patterns. This would only occur on systems that had nearly no free RAM before the start of the RAM test. So typically only on systems with - RAM Test, made some changes when allocating/deallocating memory for the test in low memory situations, fixing a potential bug that could cause verification errors when small amounts of RAM (- RAM Test, made some changes so multiple copies of BurnInTest running the RAM test will have separate shared memory blocks, still not recommended to run multiple copies of BurnInTest at the same time however.
- 3D Test, DX12, added a check before the DX12 executable is launched if the system is going to Suspend/Hibernate and wait until system is resumed, this should prevent an error being thrown if the test stats at the same time as the system is going to sleep (seen when rapidly sleeping/resuming system in a loop)


BurnInTest Professional 9.2 Build 1005
- Audio loopback test, now supports PassMark Loopback Audio Plug
- Audio loopback test fixed an issue with the audio loopback test where if the test run time selected was 0 (run forever) then then sound playback time was too low (-1 second) instead of the expected 20 seconds.
- RAM test fixed a bug where the RAM test may only allocate 200MB of RAM for testing when run at 50% or lower duty cycle
- Fixed monitor numbers in log files starting at 0 to now start at 1
- Added GPU name used for each DX12 test to log


BurnInTest Professional 9.2 Build 1004
- Added initial support for reading temperatures from Intel 11th gen CPUs
- RAM Test, updated a trace log message when low memory is - Added a new information log message when memory is very low when trying to run the RAM test
- Disk test, fixed an issue where disks numbers being tested >80 might not show up in the log correctly

Fixed:
- an issue where disks weren't automatically selected when run in conjunction with minimising system info collection command line flag (-w) and the auto select disks preference setting
- a UI issue where if the RAM test logged an error it might not be displayed on the dashboard until the test finished
- an issue when reading temperatures from some NVMe disks
- an issue when reading temperatures from AMD CPUs


BurnInTest Professional 9.2 Build 1003
- Fixed a crash that could occur at startup when usingthe -R command line flag
- "Disk test,forced destruction of any partition information and get systenn to update partition information when running a physical disk test,this prevent an access denied error when tryingto test some physical drives that had partition information but the volumes weren't mounted"
- "Temperature graph,redrawn at end of test to display all samples"
- "Changed system information tab to show battery current charge, design and full charge capacity Made some changes to the installer so BurnlnTest won't launch after a silent install"
- "USB Test,fixed an issue with the scripting command 'USB3CONNECTIOIN ' which was not setting the chosen speed correctly for 12 or 5000"
- "USB Test,fixed a bug where USB threads were forced to stop if any plug was failing to be enumerated"
- "USB Test,fixed a case where a USB error may not be thrown at test start under some circumstances where the plug was being forced into a particular test speed (eg USB3 plug on a connection with USB2 lines disconnected)."


BurnInTest Professional 9.2 Build 1002
- Advanced network test, endpoint, fixed some possible crashes when memory failed to allocate
- Advanced network test, fixed a bug where a "connection reset by peer error" could occur when trying to test 4 or more network cards
- Added NOTEMP command line flag to disable temperature collection
- Fixed an inconsistency between BurnInTest and the Directlo driver that was causing the parallel port test to fail
- Decreased a timeout value when collecting SMART disk information that could cause the temperature initialising and collection to free or time out when some USB drives were attached to the system under test
- Fixed a possible crash when gathering SMART information from hard drives


BurnInTest Professional 9.2 Build 1001
- Fixed a bug where USB3 low level errors would display an error message for the DX12 test rather than a information line for USB3 low level errors
- Added a minimum size to the BurnInTest window so all UI elements can be accessed
- Updated system information library with initial support for AMD Ryzen 5000 Series CPU info and temperatures, support for CPU groups when retrieving per-core temperatures for Intel chipsets
- Fixed "Display errors by categories" checkbox being hidden on high DPI settings


BurnInTest Professional 9.2 Build 1000
- Rebranded "BurnInTest Pro" to "BurnInTest Windows"
- "BurnInTest Standard" has now been discontinued
- Management console, added an error when there was a server side error or response other than HTTP status 200 (eg 500)
- Endpoint, fixed a bug where the last digit of an IPV4 address from BurnInTest could be truncated in some cases resulting in a failure to start the test
- Added currently selected configuration filename to main window


BurnInTest Professional 9.1 Build 1009
- Management console, fixed a bug where unprintable characters in some system information fields (eg BIOS serial) could prevent BurnlnTest correctly connecting to the management console
- Added CPU voltage from SMBIOS to system information
- Added extra information to DX12 error logging
- Updated system information library for support for reading temperatures and SMART information for NVMe drive behind USB-NVMe bridges (eg JMicron JMS583, Realtek RTL9210, ASMedia ASM2362)
- Advanced Network Test, Added more setting value bounds checking to advanced network test preferences
- Advanced Network Test Endpoint, fixed a crash that could occur on exit while cleaning up
- Advanced Network Test Endpoint, stopped displaying an error message at startup when Bluetooth was not available
- Advanced Network Test Endpoint, fixed a crash that could occur in the endpoint
- Memory Test, fixed crash that could occur after allocating a small amount of RAM
- When using the -MF command line flag the machineid.dat file will now be saved at this location when using save as default button


BurnInTest Professional 9.1 Build 1008
- Ѕсrірtіng – Аddеd ІD flаg tо ЅЕТМАNАGЕМЕNТ соmmаnd
- Аdd mіѕѕіng mоdеl whеn dеtесtіng Іntеl Соmеt Lаkе сhірѕеtѕ fоr СРU іnfоrmаtіоn аnd tеmреrаturеѕ
- Аddеd Іntеl Ісе Lаkе сhірѕеt ѕuрроrt fоr СРU іnfоrmаtіоn аnd tеmреrаturеѕ
- Fіхеd АDМ Rуzеn tеmреrаturеѕ bеіng dіѕрlауеd tоо lоw


BurnInTest Professional 9.1 Build 1007
- RAM test, fixed an instance where the RAM test process might crash if it had allocated a very small amount of RAM initially (<100MB) and then tried to allocate more
- Management console, fixed a bug where BurnInTest might not send a test finished time in test result
- Fixed some display issues on the dashboard for the standard and advanced network tests
- Disabled time and cycle count editing in dashboard user interface and added message for trial version (was always set to 15 minutes for trial version but dashboard UI was not reflecting this)
- Fixed a recent temperature collection change that was causing some AMD CPU temps to be displayed incorrectly
- Added support for Intel Comet Lake chipset temperatures
- Added Qemu/KVM to list of known Linux VMs so that CPU MSR information is not processed (to prevent BSOD in VM)
- Replaced Testsound.wav and Testsound.mp3 example files used for sound test with cleaner sounding examples


BurnInTest Professional 9.1 Build 1006
- Change log not available for this version


BurnInTest Professional 9.1 Build 1005
- Change log not available for this version


BurnInTest Professional 9.1 Build 1004
- Sound test, Loopback test, fixed a possible crash that could occur if there was no input device available
- Management console, fixed an issue where a connect message wasn't correctly sent when a large amount of system information was present (eg 10+ disks etc)
- Fixed a bug where some event source strings were not printed correctly (only a single character) to the trace log
- Fixed the display of hard disk information only showing minimal information (no serial etc) in WindowsPE
- Updated system information library with some AMD Ryzen temperature fixes (4600H, 4800H)


BurnInTest Professional 9.1 Build 1003
- Scripting, fixed an issue where script would continue running next script line when STOP button was clicked
- Disk test, fixed an instance where disk test files were not being kept on disk when used in conjunction with the -K command line parameter
- Slightly increased test tile size to allow for extra USB information being displayed
- Install to USB, now includes machineid.dat if file exists
- USB test, added the "Check bus error" option to the preferences window to allow user to enable/disable logging of the low level errors. "Low level errors" information field added to USB test display


BurnInTest Professional 9.1 Build 1002
- Memory Test, fixed a crash / timeout error that could occur in low memory situations
- Added some extra logging to trace file with command line string
- Added some extra error information when Print action fails


BurnInTest Professional 9.1 Build 1001
- Fixed missing digital signatures on some executables (plugins, memtest, DX12 test) which could prevent the executables being launched by BurnInTest or show an unknown error during the memory test


BurnInTest Professional 9.1 Build 1000
- Memory Test, made some changes to how the memory is allocated at the start of the test and reallocated during the test. Previously memory was allocated in one large allocation (per memory test process), however on systems with large amount of RAM (eg 4TB) the test would time out when test RAM was reallocated. Now the test processes will allocate/deallocate RAM in 100MB blocks
- Memory Test, added a small sleep if a memory allocation fails before looping to try allcIte again
- CPU Test, started reserving threads if memory test is running (1 thread for 8 or less cores*thread systems, 2 threads for > 8)
- Scripting, fixed some issues where the next line of a script might not be executed when a test was automatically stopped when using the SETERRORS ACTION STOP command
- 3D Test, fixed a bug where last 3D DX12 error string was not being displayed in dashboard list view


BurnInTest Professional 9.0 Build 1018
- Management console, started sending more memory information to management console on initial connection so RAM details table can be populated from BurnlnTest connections
- Plugins, fixed an issue where the test run wouldn't automatically stop when running just plugins (no main tests included) and the plugins had finished
- Plugins, fixed an issue where the next ugin wouldn't start when running plugins during the main tests (not pre-test plugins) and the option "run each separately" was selected
- 2D EMC testing, added new option to swap pattern displayed on primary monitor • 2D EMC testing, added an option to disable the sine wave tone that is played during the test
- 2D EMC testing, fixed an issue when the primary monitor was not the left most (#0) monitor that would cause the test to display on the wrong monitor and in incorrect sizes
- Fixed an issue where DirectlO.sys could be held open if BurnlnTest was started a second time on the same system if temperature monitoring was enabled. This could then cause system information to not be collected correctly (eg missing memory details) on the second BurnlnTest launch (if system was not restarted between launches)


BurnInTest Professional 9.0 Build 1017
- Disk test, added some extra checks that block size is not invalid when starting the test
- 3D Test, changed default test size to 800x600
- 3D Test, DX12 test, made some changes so test window can be moved to a different screen location
- Management console, made some changes so that clearing the Machine ID in the report information dialog will close the current management console connection and allow the config (or the default values in machineid.dat) to be saved with a blank Machine ID. This will then be newly generated next time BurnlnTest is opened using that config and the connection to the management console is made.
- Memory test, made some changes so the test isn't waiting longer than it needs to when running in conjunction with USB2 plugs or the USB test has errors before connecting to a plug (the memory test will wait for up to 1 minute before starting to allow USB plugs to connect and the USB3 benchmark test to run)
- CPU Test, added option to allow number of CPU test threads to be chosen Added a warning message when running the 3D DX12 test in conjunction with the GPGPU and CPU test at high duty cycles
- Logging, added duty cycle for the selected tests to the normal log output
- Fixed a crash on start up that could occur on Intel Baytrail systems due to an invalid MSR read


BurnInTest Professional 9.0 Build 1016
- Change log not available for this version


BurnInTest Professional 9.0 Build 1015
- Made a change to the 3D DX12 test to remove a timer watching for completion of the test, this timer could cause an error to occur if the system was put to sleep and then resumed. Now the background watchdog timer (that checks the operations count of a test continues to increase) will be used to detect if there is an issue running the 3D test
- Fixed a buffer overflow issue that could cause a crash in the cpu max heat test
- Changed behaviour of memory test when it generates an “unknown error”


BurnInTest Professional 9.0 Build 1014
- Change log not available for this version


BurnInTest Professional 9.0 Build 1013
- Added some test information to the display of the 3D test progress tile on the dashboard
- Network test, added extra output to trace level 1 log each cycle (500 packets) for standard network test (packets sent / recv, bytes sent, max / avg delay, total bad packets)
- Fixed a bug where a new test could be added using the "Test Selection and & Duty Cycles" menu item when the test results were being displayed, leading to a new test tile with no result (which could appear as a blank space on the tile view)
- Added a warning message and option to clear results when attempting to use the "Test Selection and & Duty Cycles" menu item when in a "Results" test state
- Made a change to detect USB drives better when auto selecting disk test options
- Fixed a crash that could occur in the 32bit build when trying to use the duty cycle slider for a test on the dashboard tab
- Management console, now when technician or customer is changed in the report details any current connection to the management console will be restarted so the changes are sent to the management console
- Fixed a bug in the DirectX12 3D test that could cause a "Test was interrupted" error message when BurnInTest attempts to resize/move the test window after initial creation
- Fixed temperature display for Ryzen 2700 PRO


BurnInTest Professional 9.0 Build 1012
- Added outputting of PCIe statistics to trace activity level 1 log once per cycle
- Fixed a bug where saved report defaults (technician, customer, serial etc) could be cleared when the current results were cleared
- Made a change to the CPU heat test so that the SSE2 heat test checks for AVX CPU support as well as some AVX instructions being used (which caused a crash on old CPUs like the Core 2 Quad 6600)
- Fixed an issue with the TPM test where V2 TPMs might not be found correctly and throw a "self test failed" error
- Added a new error to the TPM test if the self test command is blocked by the operating system
- Fixed an issue in the DX12 3D test where if an error occurred during the render process it previously might not be displayed until the 3D cycle finished. Now an error will be flagged when the error occurs and the test will stop running.
- Changed behaviour of scrolling letter 2D test so it will continue to run when not in the foreground
- Added technician and customer details to management console connection message
- Changed editing of report details so when technician or customer is changed any current connection to the management console will be restarted (starting a new management console session)
- Increased size limit of system information details fields sent to management console
- Increased number of system information items sent to the management console from 16 to 25
- Fixed some possible array overflows that could cause a crash when generating the management console connection message
- Started signing installer with SHA256


BurnInTest Professional 9.0 Build 1011
- Fixed a crash that could occur when using a config file from version 8
- Updated system information library to work around a crash caused by Windows 10 Enterprise device guard on some AMD systems


BurnInTest Professional 9.0 Build 1010
- Fixed a bug in the 2D colour bar test that was preventing the main BurnInTest windows from handling messages (eg when clicking the stop button) which made it impossible to stop the test.
- Removed the verified operations count for the GPGPU as it was unused, added an error count to the dashboard tile
- Fixed a bug preventing bitaccess.txt from correctly working with the test selections, times and cycles on the dashboard display
- Fixed a bug preventing bitaccess.txt working with the TPM test
- Made some changes so invalid filename characters are stripped from the log file prefix name when using system variables replacements


BurnInTest Professional 9.0 Build 1008
- Fixed an issue when reading the configuration file that could cause the "Machine type" and "Serial number" to display invalid characters in system information


BurnInTest Professional 9.0 Build 1007
- Made some changes to the advanced network test in order to run a bit slower and allow smaller target speeds on low speed network cards
- Fixed some display issues with the advanced network test dashboard tile view
- Updated system information library to fix some issues when reading Intel SSD temperatures
- Added some extra TPM error messages
- Fixed an issue with the PHYSDISK command line parameter and the auto select disks setting when running in WinPE not correctly selecting all the physical disks
- Fixed a bug where if just a pre test was selected (eg the TPM test) then it was possible for the test run to not stop correctly after the pre test was finished
- Fixed a minor bug in calculation of the Cycle in the USB3 test
- Changed the packet count per cycle of the USB3 test to 115,000 to bring the cycle count more into line with the USB2 cycle count


BurnInTest Professional 9.0 Build 1006
- Changed behaviour so when using a script from the command line the management console connection is delayed until a config (with the management console enabled) is loaded or the SETMANAGEMENT script option is used
- Fixed a crash that could occur when turning on the management console option using a script
- Removed IP information for network cards from test certificate
- Install to USB, added window message updates when copying big files to prevent "Window not responding"
- Install to USB, added LasUsed.bitcfg file to USB drive during copy process
- Fixed a 32bit overflow when logging the offset location of an error in the Optical test that could cause negative values to be displayed for large files
- Added an error message when the DX12 test executable is missing / fails to launch
- Fixed the display of the number of USB tests running on the test progress tile (previously showing an incorrect number of tests running).
- Temperature graphing, added checks and fixes for graphing more than the maximum # of temperature sources (32)
- Fixed a bug where selecting "No Monitoring" for temperature monitoring in test preferences could lead to a crash


BurnInTest Professional 9.0 Build 1005
- Added logging of DX12 error string when available
- Changed time/duty cycle entry on dashboard so values are saved when losing focus, not just on enter keypress
- Changed default network test settings to be error ratio of 0.1% instead of each single missing packet
- Made the test preferences dialog a bit smaller
- Added AVX/AVX2/FMA3/FMA4 settings to SETCPU script command
- Fixed a bug in the CPU test where if just the AVX/AVX2/FMA3/FMA4 instructions were selected then the test would not perform any operations
- Fixed a bug in the endpoint.exe (advanced network test) not updating the current ethernet statistics while a test was running
- Fixed incorrect logging test name for TPM
- Fixed a bug when removing advanced network test from tileview, would still be present in list view on dashboard
- Fixed a bug when trying to remove the advanced network test using the remove link in list view on dashboard
- Fixed a bug with the text not drawing correctly for the Advanced network test dashboard tile when a test was running


BurnInTest Professional 9.0 Build 1004
- Fixed a bug with the DX12 test losing it's operations and cycle count after 15mins
- Fixed a possible "No operations" error for the DX12 test
- Fixed a bug with Advanced network, PCIE and serial port tests not updating operations count when dashboard tab was not displayed, which could cause a "No operations detected" error message.
- New in BurnInTest Professional 9.0 Build 1003 (March 23rd, 2018)
- Changes to the PCIe test for handling sleep states during testing
- Fixed a bug that could cause tests to end before their set runtime
- New in BurnInTest Professional 9.0 Build 1002 (March 20th, 2018)
- Fixed a bug with "Install to usb" function not copying the required DX12 3D test media files
- Fixed a bug where if all tests had finished (eg in an error condition) before clicking stop button then BurnInTest could get stuck and not allow tests to be stopped properly


BurnInTest Professional 9.0 Build 1001
- Fixed some incorrect test icons on the dashboard
- Fixed a bug where times were not being sent correctly to the management console while a test was running
- Increased max script line length to account for setting the maximum number of supported serial ports for SETSERIALPORTS command
- Temperature, Fixed auto scroll checkbox not being applied when temperature settings are changed
- Temperature, Fixed overlay text appearing outside graph area
- Temperature, Fixed flickering of lines when auto scroll is disabled
- Temperature, Fixed incorrect temperature time values in chart due to temperature history wrapping back to 0


BurnInTest Professional 9.0.1000.0
New User Interface:
- New tile based user interface
- Tests will now run on top of their tile button un user interface (instead of a separate window) where appropriate
- Better scaling of user interface on 4K high DPI monitors
- New TPM (trusted platform module) pre test
- Checks for presence of TPM, runs self test and queries for version.

CPU Test:
- Added AVX, AVX2, FMA3 and FMA4 extensions
- Added checkbox for AVX, AVX2, FMA3 and FMA4 to test preferences
- Heat test, added new instructions to max heat test to maximize heat generation on CPUs that support FMA & AVX instruction sets

RAM Test:
- Improved the speed of the test by enabling memory caching. To replicate the V8 behaviour an option has been added to the test preferences to "Disable memory caching"
- Test now waits for USB3 benchmark test phase to complete before starting due to the large amount of RAM required per USB3 plug during the initial benchmark phase of the USB3 test.

Bluetooth Test:
- Updated and improved Bluetooth test
- NEW Bluetooth Advance Loopback Test to send/receive with the current Endpoint Software.
- Added Loopback test for Serial Bluetooth Devices (Tested with HC-06, Power to VCC, Ground to Ground, RX looped to TX). Requires the device to be paired/authenticated prior to be used in BurnInTest
- Bluetooth Loopback Test now supports up to 4 Remote Bluetooth devices.
- Added separate Duty cycle and preferences controls for Bluetooth test
- Added port range to Bluetooth test

2D Test:
- Added new EMC test pattern "Color bars with moving element", to comply with CISPR 32 (ITU BT.1729) standards
- Changed how example character is drawn on preferences window to better display large fonts (96, 120 etc)
- Removed font size limit (previously 8-16) on scrolling letter 2D tests
- Allowed different font sizes to be selected for the scrolling H test and adjusted the scroll speed to take into account monitor vertical resolution
- Added 2K & 4K resolution options

3D Test:
- Added new DX12 option on supported systems (64bit win 10)
- Added 2K & 4K resolution options

USB3 Test:
- Added slow speed threshold setting and warning message to USB3 loopback test
- Added a warning/error when USB3 plugs are not running at superspeed / 5Gb USB3 speed. This can be ignored by changing the BITErrorClassification.txt file
- Added ability to select USB3 plug connection speed for USB test
- Added memory allocation check when creating packet buffers for USB3 benchmark & loopback tests
- Increased usb3 thread synchronization timeout from 1 minute to 2 minutes to avoid synchronization timeout when multiple usb3 plugs (more than 4 plugs) are connected.
- Added a syncronization step before reading voltage from usb3 plugs
- Fixed a bug where sending simultaneous usb3 vendor commands could lead to failure in running the commands
- Added "Auto" option to the USB3 connection types
- Improved thread synchronisation when a large number of test plugs are connected. Many USB host controller's device drivers start to fail under high load (Open, Send and Re-enumeration requests fail if system is under high load). This works around most of the host controller flaws.

Disk Test:
- Increased disk tests limit to 100 (from 80)
- Added a "max cycle" option to the disk test

Network test:
- Added "Use 1st IP for all" network test option to preferences
- Added a new option to only select network cards that are connected/have an IP

Video Test:
- Added option to mute audio when playing video

Serial Port test:
- Added separate options to disable RTS/CTS and DSR/DTR test phase

Help:
- Moved to a new help format (ewriter) so that help topics can be opened directly in Windows 10
- Temperature Monitoring & Charts
- Updated temperature graphs to be interactive and allow scrolling and zooming.
- Temperature collection and graphing will start by default when BurnInTest is first launched so temperatures can be monitored without any tests running. On test start the graph will be reset and on test stop the temperature monitoring will be stopped to allow the graph from the test run to be saved.
- Temperature tab now has a split list view of three lists, CPU, GPU and HDD
- Changed series colours to be more visually friendly
- Added checks for the maximum number of temperature sources to monitor
- Fixed scrolling/dragging issues
- Added zoom buttons
- Added support for multiple GPU temperature readings
- Customer certificate template
- Added marker for inclusion of the temperature table chart

Scripting:
- Added more USB options to scripting
- Added SETBLUETOOTH Scripting commands

Misc:
- Added support for reading and logging fan speed from SpeedFan utility
- Fixed a bug when using the PHYSDISK command line parameter in WinPE where the physical specific disk patterns were not available in the select all drop down
- Fixed some problems displaying the FMA3 support for CPUs in system information
- Added way to disable stop button, disable time and cycle settings when using bitaccess.txt to prevent people changing the run time and stopping test early
- Added option to include the duty cycle of each test in the Report Information window
- Turned optical test off by default
- Removed GPGPU test from standard edition

Preferences
- Increased the size of Preferences window
- Changed temperature source/threshold combo boxes to editable list view with checkboxes
- Combined Pre-Test/Post-Test tabs. Combined Serial Port/Parallel Port tabs
- Added %MCMACHINEID% flag to logging file name preferences to allow management console ID to be used as part of the logging path
- Made some changes to the memory test preferences window tab for better readability
- Management console
- Updated & rewrote central management console database to hold testing results